Post Reply

engine breather pipe replace ment

Post by Captin Slow Contact Captin Slow » Subscribing Member » Mon Mar 02, 2020 10:19 pm
Joined: Fri Aug 16, 2019 10:38 am
Posts: 47
getting a new pipe for the engin dose the breather pipe have like a mesh (like a kettle desale meas) in it as i am gettin 2 diferent size pipes and joining them what can i use.

one end to the rookr cover the outher goes to the big pipe that sits between the air box and the carb

thanks for looking and any help i would be gratfull thank you

Re: engine breather pipe replace ment

User avatar
Post by Phil Bradshaw » Club admin » Mon Mar 02, 2020 11:04 pm
Joined: Sun Sep 02, 2012 7:15 pm
Posts: 4550
Steel gauze mesh is there but it's inside the camshaft cover underneath the hose spigot at the back.

If you can blow through a hose connected to the spigot when the oil filler cap is removed then the gauze is clear and needs no attention.

Pipe to the air cleaner hose should be just plain oil-resistant hose so a made-up pipe from two sizes should be fine as long as it doesn't kink.
.
  • What is real is not the appearance but the idea, the essence of things. Constantin Brâncuși

Post Reply

Return to “Petrol”