Post Reply

V-belt specification for 2063cc diesel

Post by joedusta » Subscribing Member » Fri Jun 08, 2018 8:40 pm
Joined: Fri Jun 01, 2018 4:28 pm
Posts: 7
What length/specification of v-belt should i get for the GM 2063cc diesel?

Re: V-belt specification for 2063cc diesel

User avatar
Post by Phil Bradshaw » Club admin » Fri Jun 08, 2018 9:15 pm
Joined: Sun Sep 02, 2012 7:15 pm
Posts: 3579
Quinton Hazell QBA900, Gates 6216MC or equivalent (900x10mm).
  • What is real is not the external form but the idea, the essence of things. Constantin Brâncuși

Re: V-belt specification for 2063cc diesel

Post by joedusta » Subscribing Member » Thu Jun 21, 2018 5:56 pm
Joined: Fri Jun 01, 2018 4:28 pm
Posts: 7
The right belt seems to be between a 6216mc and a 6268mc (the one that i put on temporarily to limp it to the parts shop) , must be some none standard pulley. Hopefully will find the right one when the shop opens up tomorrow.

Re: V-belt specification for 2063cc diesel

User avatar
Post by Phil Bradshaw » Club admin » Fri Jun 22, 2018 9:18 am
Joined: Sun Sep 02, 2012 7:15 pm
Posts: 3579
This can happen if a non-standard alternator is fitted which may have a larger diameter pulley, or the body may contact the engine before the adjuster reaches its minimum position.

Useful to know about Gates 6268mc (1113x10mm). :thumb:
.
  • What is real is not the external form but the idea, the essence of things. Constantin Brâncuși

Post Reply

Return to “Diesel”