Page 1 of 1

V-belt specification for 2063cc diesel

Posted: Fri Jun 08, 2018 8:40 pm
by joedusta
What length/specification of v-belt should i get for the GM 2063cc diesel?

Re: V-belt specification for 2063cc diesel

Posted: Fri Jun 08, 2018 9:15 pm
by Phil Bradshaw
Quinton Hazell QBA900, Gates 6216MC or equivalent (900x10mm).

Re: V-belt specification for 2063cc diesel

Posted: Thu Jun 21, 2018 5:56 pm
by joedusta
The right belt seems to be between a 6216mc and a 6268mc (the one that i put on temporarily to limp it to the parts shop) , must be some none standard pulley. Hopefully will find the right one when the shop opens up tomorrow.

Re: V-belt specification for 2063cc diesel

Posted: Fri Jun 22, 2018 9:18 am
by Phil Bradshaw
This can happen if a non-standard alternator is fitted which may have a larger diameter pulley, or the body may contact the engine before the adjuster reaches its minimum position.

Useful to know about Gates 6268mc (1113x10mm). :thumb:
.