Re: Cylinder head

User avatar
Post by Phil Bradshaw » Club admin » Sun Nov 12, 2017 12:21 pm
Joined: Sun Sep 02, 2012 7:15 pm
Posts: 3462
Correct leads should be 7mm diameter Hypalon (high temperature) with carbon filament core.

The ballasted ignition system on a CF already provides increased voltage for starting.

Increasing the HT current at the plugs by using metal core cable can cause radio interference (possibly unlawful) as well as flash-over problems at the hot end.
  • What is real is not the external form but the idea, the essence of things. Constantin Brâncuși

Re: Cylinder head

Post by Budbarnsley » Sun Nov 12, 2017 5:17 pm
Joined: Fri Sep 08, 2017 8:37 pm
Posts: 17
Thanks for that Phil where can I get these from please

Re: Cylinder head

User avatar
Post by Phil Bradshaw » Club admin » Mon Nov 13, 2017 12:16 pm
Joined: Sun Sep 02, 2012 7:15 pm
Posts: 3462
Club Parts Department - made to order either as sets or individually to length.

Contact Parts. :thumb:
  • What is real is not the external form but the idea, the essence of things. Constantin Brâncuși

Re: Cylinder head

Post by Budbarnsley » Fri Jan 26, 2018 1:08 pm
Joined: Fri Sep 08, 2017 8:37 pm
Posts: 17
Cant seem to find where to post anew topic

Re: Cylinder head

User avatar
Post by VDUB384 » Club admin » Sat Jan 27, 2018 10:46 am
Joined: Wed Sep 12, 2012 9:01 am
Posts: 1304
If you have a fault in your wiring then it doesn't matter if you have ordinary or electronic ingnition you need to find the fault first.
Dave
Whilst good maintainece is the best prevention"If its not broken don't fix it."
Image

Post Reply

Return to “Petrol”