Re: Our CF Advantura

User avatar
Post by Packern Contact Packern » Mon Jan 22, 2018 5:01 pm
Joined: Fri Sep 11, 2015 8:24 pm
Posts: 156
PHILLLLLLLLLL I cant see me pictures again
Nigel Packer

Re: Our CF Advantura

User avatar
Post by admin » Site Admin » Tue Jan 30, 2018 3:50 am
Joined: Fri Aug 24, 2012 5:56 pm
Posts: 1640
Sorted. :thumb:

Re: Our CF Advantura

User avatar
Post by Packern Contact Packern » Fri Jun 15, 2018 8:29 pm
Joined: Fri Sep 11, 2015 8:24 pm
Posts: 156
A Bit more

This time the rusty rear wheel arch liners.

Image

3 sides of the mounting lip were rusted away! So cut them off. Also pited and rusted through in one corner. Managed to find a pice of coated steel from an old tin shed I resized a few yesrs ago just the job to pop rivet on to make good with some Sikaflex to seal it.

Image
Nigel Packer

Re: Our CF Advantura

User avatar
Post by Packern Contact Packern » Mon Jun 18, 2018 8:46 am
Joined: Fri Sep 11, 2015 8:24 pm
Posts: 156
The finished item waiting for the sealer to dry before painting.

Image
Nigel Packer

Re: Our CF Advantura

User avatar
Post by VDUB384 » Club admin » Mon Jun 18, 2018 11:44 am
Joined: Wed Sep 12, 2012 9:01 am
Posts: 1400
Maybe Easyer getting a fibreglass one Smith and Deakon in recomondations
Dave
Whilst good maintainece is the best prevention"If its not broken don't fix it."
Image

Re: Our CF Advantura

User avatar
Post by Packern Contact Packern » Mon Jun 18, 2018 5:17 pm
Joined: Fri Sep 11, 2015 8:24 pm
Posts: 156
Hi Dave

I did look at those but they are for the twin wheel axle ours is the single one and are wider than ours apparently.
Also at £120 quid for the two I thought bugger it just repair them at least its sort of original then as well.
But thanks for the tip :)
Cheers
Nigel Packer

Re: Our CF Advantura

User avatar
Post by VDUB384 » Club admin » Tue Jun 19, 2018 7:40 am
Joined: Wed Sep 12, 2012 9:01 am
Posts: 1400
Sorry I was on the othe page I was referring to the bonnet in fibreglass .
Dave
Whilst good maintainece is the best prevention"If its not broken don't fix it."
Image

Re: Our CF Advantura

User avatar
Post by Packern Contact Packern » Tue Jun 19, 2018 10:53 am
Joined: Fri Sep 11, 2015 8:24 pm
Posts: 156
Hi Dave

I see what you mean its worth thinking about I agree. I am still amazed they still make them !!!!!
Nigel Packer

Post Reply

Return to “Blogs”