Post Reply

Zenith 36IVE and Zenith 36IV

Post by will broad » Sat Jan 27, 2018 4:59 pm
Joined: Mon May 30, 2016 4:29 pm
Posts: 19
I have a Zenith 36IVE fitted to my 1973 slant engine, this carb has fixed calibration screw.
My Question is what is the difference between the two carbs apart from the fixed screw? And should I replace it with the 36IV carb?

Thanks...Will

Re: Zenith 36IVE and Zenith 36IV

User avatar
Post by Phil Bradshaw » Club admin » Tue Jan 30, 2018 3:39 am
Joined: Sun Sep 02, 2012 7:15 pm
Posts: 3371
Zenith 36IVE can be made into a 36IV by removing the anti-tamper sleeve fitted to the volume control screw: remove screw, discard sleeve, refit screw then adjust idling mixture when engine is at its normal operating temperature.

If the anti-tamper sleeve has a metal cap (which would be amazing) then lever it from the sleeve with a sharp pointed tool.
  • What is real is not the external form but the idea, the essence of things. Constantin Brâncuși

Post Reply

Return to “Petrol”