Post Reply

Track Rod End Boots

Post by MattA24 » Tue Oct 17, 2017 3:21 pm
Joined: Wed Jan 15, 2014 9:06 pm
Posts: 167
Hello!

My track rod end boots have perished. There seems to be various generic replacements available, sold based on their various dimensions.

Does anyone know the correct boot dimensions for a CF?

Are there any gotchas in fitting generic boots to the track rod ends?

Obliged as ever,

Matt

Re: Track Rod End Boots

User avatar
Post by Phil Bradshaw » Club admin » Wed Oct 18, 2017 12:19 am
Joined: Sun Sep 02, 2012 7:15 pm
Posts: 3459
I think there's just 3 sizes available, one obviously too large and one obviously too small.

The boot has to stretch some over the rim of the ball socket and also the ball pin taper to seal properly, then secured at least on the ball socket rim - use the original garter spring if still in serviceable condition, soft iron wire (double turn before ends twisted together), or a suitable thin cable tie.

Boot can be fitted without detaching the track rod end from track rod to avoid having to check the toe-in afterwards.

Grease what you can of the ball joint before fitting the boot; excess grease can be wiped off after the boot is fitted.
  • What is real is not the external form but the idea, the essence of things. Constantin Brâncuși

Post Reply

Return to “Steering and road wheels”