Re: General vauxhall 4 speed questions.

Post by Graemevw » Wed Oct 02, 2019 10:10 am
Joined: Sat Sep 14, 2019 10:27 am
Posts: 30
Phil Bradshaw wrote:
Tue Oct 01, 2019 4:33 pm
Remove the detent spring housing, spring and ball to release the housing from the selector striking levers cross shaft.

If the detent ball stays in place then rotate the stop housing 180 degree once the 3 bolts are removed rather than have the ball fall out unexpectedly and be lost when the housing is withdrawn from the shaft.

Post Reply

Return to “Manual transmission”