Where to find help when you want to change major units on your CF - engine, transmission, brakes etc. - or upgrade earlier models to later specifications.
harry79
 
Posts: 118
Joined: Mon Jun 20, 2016 5:49 am
Hi all, I'm have a few questions I would like answered if possible, firstly I have a type 9 ford box 4 speed with a Laycock overdrive attached can anyone tell me where or who could supply me with a conversion plate please, secondly the gearbox I have in my cf at the moment is a 4 speed Vauxhall one, is it possible to fit the Laycock overdrive from the Ford box to the Bedford /Vauxhall box, thanks



Martin.

Postby harry79 » Wed Feb 01, 2017 1:18 pm


User avatar
Phil Bradshaw
Club admin
 
Posts: 3124
Joined: Sun Sep 02, 2012 6:15 pm
Location: Rossendale (BB4)
The only adaptor plate that I've seen was CNC machined for the one job.
Unfortunately I didn't find out who made it. :(
Keep an eye on eBay: I've seen one at least in the past year or so.

To swap the overdrive you'll need a Vauxhall gearbox mainshaft for overdrive; 4-speed gearbox will need dismantling to fit the shaft.
    What is real is not the external form but the idea, the essence of things. Constantin Brâncuși

Postby Phil Bradshaw » Thu Feb 02, 2017 12:45 am


harry79
 
Posts: 118
Joined: Mon Jun 20, 2016 5:49 am
Thanks Phil, in your opinion which gearbox would you go with, to be honest I'm unsure what to do, thanks again.
Martin.

Postby harry79 » Thu Feb 02, 2017 12:17 pm


bedfordcf2van
 
Posts: 59
Joined: Mon Sep 07, 2015 4:47 pm
Location: Portugal
Hi Martin, I will probably be making a couple of CNC adapter plates for type9 in the following months.
I will let you know here when that happens. ;)

Postby bedfordcf2van » Fri Feb 03, 2017 1:45 pm


harry79
 
Posts: 118
Joined: Mon Jun 20, 2016 5:49 am
Thankyou, very much appreciated.

Martin.

Postby harry79 » Fri Feb 03, 2017 4:57 pm